ASTM A276/ A479 Type 2507 Hex Bar & Rod Stockist

Check Attractive Price Offer On Alloy 2507 Flat Bar, Importers of UNS S32750 Square Bars

Super Duplex Round Bar

Super Duplex Round Bar

Super Duplex 2507 Round Bar

Super Duplex 2507 Round Bar

Alloy 2507 Rod

Alloy 2507 Rod

Table of Content

Super Duplex Round Bar Specification List

Standards of Super Duplex 2507 Rods  ASTM / ASME SA 276 / A 479
2507 Hex Bar Dimensions  ASTM, ASME and API
Size of saf 2507 round bar 10 To 100 mm Dia in 100 TO 6000 mm Length.
Super Duplex Steel S32760 Bright Bars Form  Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Super Duplex Steel UNS S32950 Polished Bar Finish  Bright, Polish & Black
Grades of ASTM A276 Super Duplex S32750 Flat Bar UNS S32750, S32760 , S32950

Different Duplex 2507 Round Bars Types

Super Duplex Polish Stainless Steel Round Bar Uns32750

Super Duplex Polish Stainless Steel Round Bar Uns32750

S32760 F55 Duplex Stainless Steel Round Bar

S32760 F55 Super Duplex Stainless Steel Round Bar

Duplex 2507 Stainless Polished Round Bar

Super Duplex 2507 Stainless Polished Round Bar

Super Duplex 32760 Stainless Steel Round Bars

Super Duplex 32760 Round Bar

DIN 1.4410/S32750 Duplex Stainless Steel Bright Ss Round Bar

DIN 1.4410/S32750 Super Duplex Stainless Steel Bright Bar

Uns S32750 Saf2507 6mm Duplex Stainless Steel Bright Round Bar

Uns S32750 Saf2507 6mm Suoer Duplex Bright Round Bar

2507 Hot Rolled Super Duplex Steel Round Bar

2507 Hot Rolled Super Duplex Steel Round Bar

Alloy 2507 Rod Finish

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

ASTM A276 UNS S32750 Super Duplex Bar length Chart

  • Metric system: standard length is 9 - 12 metres
  • USA : 40 feet

2507 Super Dupex Bright Bar Condition

Surface
conditions		 Ra, µm
Typical value		 Size, mm dia
Peeled and burnished 1 20-250

Size of DIN 1.4410 Super Duplex Flat Bar

Flat bar – metric sizes and weights
Flat Size KG’s per Metre Standard Length (metres) Colour Code
10 x 3 0.24 6.0 Blue
13 x 3 0.31 6.0 Blue
13 x 5 0.46 6.0 Orange
16 x 3 0.38 6.0 Blue
16 x 5 0.64 6.0 Orange
16 x 8 1.03 6.0 Red
20 x 3 0.48 6.0 Blue
20 x 5 0.81 6.0 Orange
20 x 6 0.97 6.0 White
20 x 10 1.61 6.0 Yellow
25 x 3 0.60 6.0 Blue
25 x 5 1.01 6.0 Orange
25 x 6 1.21 6.0 White
25 x 8 1.61 6.0 Red
25 x 10 2.01 6.0 Yellow
25 x 12 2.41 6.0 Pink
32 x 3 0.77 6.0 Blue
32 x 5 1.29 6.0 Orange
32 x 6 1.55 6.0 White
32 x 8 2.06 6.0 Red
32 x 10 2.58 6.0 Yellow
32 x 12 3.09 6.0 Pink
40 x 3 0.97 6.0 Blue
40 x 5 1.61 6.0 Orange
40 x 6 1.93 6.0 White
40 x 8 2.58 6.0 Red
40 x 10 3.22 6.0 Yellow
40 x 12 3.86 6.0 Pink
40 x 16 5.15 6.0 Grey
40 x 20 6.14 6.0 Green
50 x 3 1.21 6.0 Blue
50 x 5 2.01 6.0 Orange
50 x 6 2.41 6.0 White
50 x 8 3.22 6.0 Red
50 x 10 4.02 6.0 Yellow
50 x 12 4.83 6.0 Pink
50 x 16 6.44 6.0 Grey
50 x 20 8.05 6.0 Green
50 x 25 10.1 6.0 Purple
65 x 3 1.57 6.0 Blue
65 x 5 2.62 6.0 Orange
65 x 6 3.14 6.0 White
65 x 8 4.18 6.0 Red
65 x 10 5.23 6.0 Yellow
65 x 12 6.28 6.0 Pink
65 x 16 8.37 6.0 Grey
65 x 20 10.5 6.0 Green
65 x 25 13.1 6.0 Purple
75 x 5 3.02 6.0 Orange
75 x 6 3.62 6.0 White
75 x 8 4.83 6.0 Red
75 x 10 6.04 6.0 Yellow
75 x 12 7.24 6.0 Pink
75 x 16 9.66 6.0 Grey
75 x 20 12.1 6.0 Green
75 x 25 15.1 6.0 Purple
75 x 40 24.1 6.0 Yellow
90 x 5 3.62 6.0 Orange
90 x 6 4.35 6.0 White
90 x 8 5.79 6.0 Red
90 x 10 7.24 6.0 Yellow
90 x 12 8.69 6.0 Pink
100 x 5 4.02 6.0 Orange
100 x 6 4.83 6.0 White
100 x 8 6.44 6.0 Red
100 x 10 8.05 6.0 Yellow
100 x 12 9.66 6.0 Pink
100 x 16 12.9 6.0 Grey
100 x 20 16.1 6.0 Green
100 x 25 20.1 6.0 Purple
100 x 50 40.2 6.0 Green
110 x 6 5.31 6.0 White
110 x 8 7.08 6.0 Red
110 x 10 8.85 6.0 Yellow
110 x 12 10.6 6.0 Pink
130 x 5 5.23 6.0 Orange
130 x 6 6.28 6.0 White
130 x 8 8.37 6.0 Red
130 x 10 10.5 6.0 Yellow
130 x 12 12.6 6.0 Pink
130 x 16 16.7 6.0 Grey
130 x 20 20.9 6.0 Green
130 x 25 26.2 6.0 Purple
150 x 5 6.04 6.0 Orange
150 x 6 7.24 6.0 White
150 x 8 9.66 6.0 Red
150 x 10 12.1 6.0 Yellow
150 x 12 14.5 6.0 Pink
150 x 16 19.3 6.0 Grey
150 x 20 24.1 6.0 Green
150 x 25 30.1 6.0 Purple
150 x 50 60.4 6.0 Green
180 x 5 7.24 6.0 Orange
180 x 6 8.69 6.0 White
180 x 10 14.5 6.0 Yellow
180 x 12 17.4 6.0 Pink
180 x 16 23.2 6.0 Grey
180 x 20 29.0 6.0 Green
180 x 25 36.2 6.0 Purple
200 x 6 9.66 6.0 White
200 x 8 12.9 6.0 Red
200 x 10 16.1 6.0 Yellow
200 x 12 19.3 6.0 Pink
200 x 16 25.7 6.0 Grey
200 x 20 32.2 6.0 Green
200 x 25 40.3 6.0 Purple
250 x 6 12.1 6.0 White
250 x 8 16.1 6.0 Red
250 x 10 20.1 6.0 Yellow
250 x 12 24.1 6.0 Pink
250 x 16 32.2 6.0 Grey
250 x 20 40.2 6.0 Green
250 x 25 50.3 6.0 Purple
300 x 6 14.5 6.0 White
300 x 8 19.3 6.0 Red
300 x 10 24.1 6.0 Yellow
300 x 12 29.0 6.0 Pink
300 x 16 38.6 6.0 Grey
300 x 20 48.3 6.0 Green
300 x 25 60.4 6.0 Purple

Sizes of Sa 276 UNS S32760 Round Bar

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Cold Drawn and Polish 3.00 to 75.00 1/8 to 3.00 h8-h9-h10-h11
Cold Drawn and Ground 10.00 to 75.00 5/6 to 2.50 h8-h9-h10-h11
Peeled and Polished 40.00 to 150.00 1.50 to 6.00 h11, h11-DIN 1013
Peeled and Ground 20.00 to 50.00 3/4 to 2.00 h9-h10-h11

Cut to size on request (tolerance +2/-0 mm). Super Duplex Round Bar Standard lengths of 2000 mm up to 6000 mm.

5.0 45.0
6.0 50.0
7.0 55.0
8.0 60.0
9.0 65.0
10.0 70.0
12.0 75.0
16.0 80.0
20.0 90.0
25.0 100.0
30.0 130.0
35.0 160.0
40.0 200.0

ASTM A276 UNS S32760 Super Duplex Rod Properties

Temperature, °C J/(kg °C) Temperature, °F Btu/(lb °F)
20 490 68 0.12
100 505 200 0.12
200 520 400 0.12
300 550 600 0.13
400 585 800 0.14

Thermal Properties of 2507 SDSS Round Bars

Metric units, W/(m °C)

Temperature, °C 20 100 200 300 400
SAF 2507 14 15 17 18 20
AISI 316L 14 15 17 18 20
Imperial units, Btu/(ft h °F)

Temperature, °F 68 200 400 600 800
SAF 2507 8 9 10 11 12
AISI 316L 8 9 10 10 12

Metric units, x10-6/°C

Temperature, °C 30-100 30-200 30-300 30-400
SAF 2507 13.5 14.0 14.0 14.5
Carbon Steel 12.5 13.0 13.5 14.0
AISI 316L 16.5 17.0 17.5 18

Imperial units, x10-6/°F

Temperature, °F 86-200 86-400 86-600 86-800
SAF 2507 7.5 7.5 8.0 8.0
Carbon Steel 6.8 7.0 7.5 7.8
AISI 316L 9.0 9.5 10.0 10.0

Super Duplex Steel S32750 Cold Finished Bar Application

  • Super Duplex Steel 2507 Bar uses in Gas Processing
  • super duplex 2507 round bars uses in Specialty Chemicals
  • 2507 Duplex Stainless Steel Bars uses in Pharmaceuticals
  • WERKSTOFF NR. 1.4410 Hot Rolled Bars uses in Pharmaceutical Equipment
  • 2507 Duplex Steel Flat Bars uses in Off-Shore Oil Drilling
  • Super Duplex 2507 Bars uses in Power Generation
  • ASTM A276 Super Duplex Stainless Steel S32760 Hollow Bars uses in Petrochemicals
  • 2507 Duplex Round Rod uses in Chemical Equipment
  • S32760 Super Duplex Forged Bars uses in Condensers
  • S32760 Super Duplex Round Bars uses in Pulp and Paper Industry
  • Super Duplex Stainless Steel WERKSTOFF NR. 1.4410 Cold Drawn Bars uses in Sea Water Equipment
  • Super Duplex S32750 Rod uses in Heat Exchangers

Super Duplex Rods Resistivity

Temperature, °C μΩm Temperature, °F μΩin.
20 0.83 68 32.7
100 0.89 200 34.9
200 0.96 400 37.9
300 1.03 600 40.7
400 1.08 800 43.2

Elasticity of duplex 2507 Hot Rolled Bar

Temperature, °C MPa Temperature, °F ksi
20 200 68 29.0
100 194 200 28.2
200 186 400 27.0
300 180 600 26.2

Temperature Range of Super Duplex Stainless Steel Round Bar

Grade Temperature
Duplex 2707 HD 1080-1120°C/ 1976-2048°F
Duplex 2507 1050-1125°C/ 1922-2057°F

UNS S32750 Square Bars Size in MM

Square bars – metric sizes and weights
Square bars Size KG’s per Metre Standard Length (metres) Colour Code
10 x 10 0.81 6.0 Yellow
12 x 12 1.16 6.0 Pink
16 x 16 2.06 6.0 Grey
20 x 20 3.22 6.0 Green
25 x 25 5.03 6.0 Purple
32 x 32 8.24 6.0 Orange
40 x 40 12.8 6.0 Yellow
50 x 50 20.12 6.0 Green

Sizes of ASTM A479 Super Duplex 2507 Hex Bar

Size in Inches Wt per Ft Wt per 12′
3/16 0.104 1.248
1/4 0.180 2.160
5/16 0.290 3.480
3/8 0.410 4.920
7/16 0.560 6.72
1/2 0.740 8.880
9/16 0.930 11.16
5/8 1.150 13.80
11/16 1.390 16.68
3/4 1.660 19.92
13/16 1.950 23.40
7/8 2.300 27.60
15/16 2.600 31.20
1 2.90 34.80
1-1/16 3.30 39.60
1-1/8 3.700 44.40
1-1/4 4.600 55.20
1-5/16 5.100 61.20
1-3/8 5.600 67.20
1-7/16 6.100 73.20
1-1/2 6.600 79.20
1-5/8 7.800 93.60
1-3/4 9.030 108.36
1-7/8 10.400 124.80
2 11.80 141.60
2-1/4 14.920 179.04
2-3/8 16.920 203.04
2-1/2 18.42 221.04
3 26.53 318.36

Check Equivalent Grades Of DIN 1.4410 Hollow, Bright and Black Bars

Equivalent Grade of Super Duplex Stainless Steel Polished Bar

STANDARD WERKSTOFF NR. UNS
Super Duplex S32750/S32760 1.4410 S32750 / S32760

Super Duplex Hollow Bar sizes

Size mm kg/m Size mm kg/m
20 x 20 x 2.0 1.12 20 x 20 x 2.5 1.35
25 x 25 x 1.5 1.06 25 x 25 x 2.0 1.43
25 X 25 X 2.5 1.74 25 X 25 X 3.0 2.04
30 X 30 X 2.0 1.68 30 X 30 X 2.5 2.14
30 X 30 X 3.0 2.51 40 x 40 x 1.5 1.81
40 x 40 x 2.0 2.31 40 x 40 x 2.5 2.92
40 x 40 x 3.0 3.45 40 x 40 x 4.0 4.46
40 x 40 x 5.0 5.40 50 x 50 x 1.5 2.28
50 x 50 x 2.0 2.93 50 x 50 x 2.5 3.71
50 x 50 x 3.0 4.39 50 x 50 x 4.0 5.72
50 x 50 x 5.0 6.97 60 x 60 x 3.0 5.34
60 x 60 x 4.0 6.97 60 x 60 x 5.0 8.54
60 x 60 x 6.0 9.45 70 x 70 x 3.0 6.28
70 x 70 x 3.6 7.46 70 x 70 x 5.0 10.11
70 x 70 x 6.3 12.50 70 x 70 x 8 15.30
75 x 75 x 3.0 7.07 80 x 80 x 3.0 7.22
80 x 80 x 3.6 8.59 80 x 80 x 5.0 11.70
80 x 80 x 6.0 13.90 90 x 90 x 3.0 8.01
90 x 90 x 3.6 9.72 90 x 90 x 5.0 13.30
90 x 90 x 6.0 15.76 90 x 90 x 8.0 20.40
100 x 100 x 3.0 8.96 100 x 100 x 4.0 12.00
100 x 100 x 5.0 14.80 100 x 100 x 5.0 14.80
100 x 100 x 6.0 16.19 100 x 100 x 8.0 22.90
100 x 100 x 10 27.90 120 x 120 x 5 18.00
120 x 120 x 6.0 21.30 120 X 120 X 6.3 22.30
120 x 120 x 8.0 27.90 120 x 120 x 10 34.20
120 X 120 X 12 35.8 120 X 120 X 12.5 41.60
140 X 140 X 5.0 21.10 140 X 140 X 6.3 26.30
140 X 140 X 8 32.90 140 X 140 X 10 40.40
140 X 140 X 12.5 49.50 150 X 150 X 5.0 22.70
150 X 150 X 6.3 28.30 150 X 150 X 8.0 35.40
150 X 150 X 10 43.60 150 X 150 X 12.5 53.40
150 X 150 X 16 66.40 150 X 150 X 16 66.40
180 X 180 X 5 27.40 180 X 180 X 6.3 34.20
180 X 180 X 8 43.00 180 X 180 X 10 53.00
180 X 180 X 12.5 65.20 180 X 180 X 16 81.40
200 X 200 X 5 30.50 200 X 200 X 6 35.8
200 x 200 x 6.3 38.2 200 x 200 x 8 48.00
200 x 200 x 10 59.30 200 x 200 x 12.5 73.00
200 x 200 x 16 91.50 250 x 250 x 6.3 48.10
250 x 250 x 8 60.50 250 x 250 x 10 75.00
250 x 250 x 12.5 92.60 250 x 250 x 16 117.00
300 x 300 x 6.3 57.90 300 x 300 x 8 73.10
300 x 300 x 10 57.90 300 x 300 x 8 90.70
300 x 300 x 12.5 112.00 300 x 300 x 16 142.00
350 x 350 x 8 85.70 350 x 350 x 10 106.00
350 x 350 x 12.5 132.00 350 x 350 x 16 167.00
400 x 400 x 10 122.00 400 x 400 x 12 141.00
400 x 400 x 12.5 152.00 400 x 400 x 16 192
Check Our Global Sales Network For SAF 2507 Threaded Rod, Chemical And Mechanical Composition Of ASME SA479 S32760 Bright Bar

2507 Super Duplex Threaded Rod Chemical Formula

Grade C Mn Si P S Cr Mo Ni N Fe
Super Duplex S32750 Round Bar 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
Super Duplex S32760 Bar 0.05 max 1.00 max 1.00 max 0.030 max 0.010 max 24.00 – 26.00 3.00 – 4.00 6.00 – 8.00 0.20 – 0.30 57.61 min

ASTM A479 UNS S32750 Round Bars Mechanical Analysis

Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
Super Duplex S32750/S32760 R0und Bar 7.8 0.281 1350 2460

Hot Rolled 2507 Duplex Round Bars Diameter Tolerance

Diameter – Smooth Turned

(These are H10 tolerances, which are ‘all minus’ tolerances )

Diameter (mm) Tolerance (mm)
18 to 30 +0 / -0.084
31 to 50 +0 / -0.100
51 to 79 +0 / -0.120

Diameter – Rough Turned

(These are ‘all plus’ tolerances)

Diameter (mm) Tolerance (mm)
75 to 150 -0 / +1.5
151 to 225 -0 / +2.0
226 to 410 -0 / +3.0

Diameter – Bright Drawn

These are H9 Tolerances
H9 Tolerances are ‘all minus’ tolerances:

+0mm / – Figure in table

Diameter (mm) Tolerance (mm)
6 to 10 +0 / -0.036
11 to 18 +0 / -0.043
19 to 30 +0 / -0.052
Tolerance In Mm For Given Tolerance Number

Diameter (mm) 6 7 8 9 10 11 12 13
>1 to 3 inc. 0.007 0.009 0.014 0.025 0.040 0.060 0.090 0.140
>3 to 6 inc. 0.008 0.012 0.018 0.030 0.048 0.075 0.120 0.180
>6 to 10 inc. 0.009 0.015 0.022 0.036 0.058 0.090 0.150 0.220
>10 to 18 inc. 0.011 0.018 0.027 0.043 0.070 0.110 0.180 0.270
>18 to 30 inc. 0.013 0.021 0.033 0.052 0.084 0.130 0.210 0.330
>30 to 50 inc. 0.016 0.025 0.039 0.062 0.100 0.160 0.250 0.390
>50 to 80 inc. 0.019 0.046 0.074 0.120 0.190 0.300 0.460
>80 to 120 inc. 0.022 0.087 0.140 0.220 0.350 0.540
>120 to 180 inc. 0.025 0.100 0.160 0.250 0.400 0.630
>180 to 250 inc. 0.115 0.185 0.290 0.460 0.720
>250 to 315 inc. 0.320 0.520 0.810
>315 to 400 inc. 0.360 0.570 0.890
>400 to 500 inc. 0.400 0.630 0.970
> 500 0.440 0.700 1.100

Tolerances on cross sections

Nominal dimension Tolerance class to ISO 286-2
h6 h7 h8 h9 h10 h11 h12
over 1 up to 3 0.006 0.010 0.014 0.025 0.040 0.060 0.100
over 3 up to 6 0.008 0.012 0.018 0.030 0.048 0.075 0.120
over 6 up to 10 0.009 0.015 0.022 0.036 0.058 0.090 0.150
over 10 up to 18 0.011 0.018 0.027 0.043 0.070 0.110 0.180
over 18 up to 30 0.013 0.021 0.033 0.052 0.084 0.130 0.210
over 30 up to 50 0.016 0.025 0.039 0.062 0.100 0.160 0.250
over 50 up to 80 0.019 0.030 0.046 0.074 0.120 0.190 0.300
over 80 up to 120 0.022 0.035 0.054 0.087 0.140 0.220 0.350
over 120 up to 180 0.025 0.040 0.063 0.100 0.160 0.250 0.400
over 180 up to 200 0.029 0.046 0.072 0.115 0.185 0.290 0.460

Tolerances on length

Type of length Length Limit deviation To be stated on order
length 3000 to 9000 +/- 500 Length
Stock length 3000 or 6000 0, +200 eg 6000
Cut to length Up to 9000 To specifications with +/- 5 minimum Length and tolerance

Tolerances on straightness

Product form Nominal dimension Deviation
Rounds – 1.0
Squares and hexagons up to 75 1.0
over 75 1.5
Flats width below 120 1.5 on width / 2.0 on thickness
width at or over 120 and w/t below 10:1 2.0 on width / 2.5 on thickness
width at and over 120 and w/t at or over 10:1 2.5 on width / 3.0 on thickness

WNR 1.4410 Super Duplex Threaded Bar Price per kg

Super Duplex 2507 Round Bar Price Prices
2b Surface 2507 Duplex Super Round Bar US $ 2200-2600 / Ton
Uns S32750 Super Duplex Bright Bar US $ 5-7 / kg
Super Duplex F53/ S32750 Round Bar US $ 1500-2000 / Ton
Super Duplex Round Bar 2205 Bar US $ 1560-2536 / Ton
We provide Multiple Payment Options of Super Duplex Stainless Steel Forged and Polished Bars

Charcteristics of Super Duplex 2507 Forged Bar

  • High resistance to chloride stress corrosion cracking
  • High Strength
  • Superior resistance to chloride crevice and pitting corrosion
  • Good general corrosion resistance
  • Suggested for applications up to 600° F
  • Low rate of thermal expansion

2507 Super Duplex Cold Rolled Round Bars Application

  • Chemical
  • Marine
  • Oil and Gas production
  • Petrochemical
  • Power
  • Pulp and Paper
  • Water desalinization

Stock Of Super Duplex Round Bar Following Manufacturers in UAE

Super Duplex 2507 Round Bar Supplier in UAE

Super Duplex 2507 Round Bar Supplier in UAE

Super Duplex Round Bars

Other Round Bar

Products

Dimension Standards

Copyright © 2020 RMT Dubai. All Right Reserved. | Website design & SEO by Mesotek