Supplier of UNS C70600 Cupro Nickel Square Bar and Rod
Check Cuni 90/10 Hex Bar Dimensions, Looking to Buy DIN 2.0872 Cupro Nickel Forged Bars from Supplier
90/10 Copper Nickel Round Bar
ASTM B151 Cuni 90/10 Rod
Cupro Nickel UNS C70600 Hex Bar
Table of Content
- 90/10 Copper Nickel Round Bar Specification Chart
- various Types of ASTM B151 Cuni 90/10 Rod
- Copper Nickel Din 2.0872 Rectangle Bar condition
- Cuni 90/10 Round Bar Sizes
- Surface finish of 90/10 Cupro Nickel Forged Bar
- Copper Nickel Din 2.0872 Rectangle Bar condition
- Cupro Nickel 90/10 Round Bar Stockist
- Copper Nickel 90/10 Cold Drawn Round Bar Standard Chart
- composition of 90/10 Cu-ni Hot Rolled Round Bar
- Physical composition of Cu-ni 90/10 Bright Bar
- Sizes of Copper Nickel WERKSTOFF NR. 2.0872 Square Bar
- Size Chart of Cupro Nickel UNS C70600 Hex Bar
- ASME SB151 Cu-ni 90/10 Hollow Bar Size
- Tolerance List of Copper Nickel 90/10 Cold Rolled Round Bar
- 90/10 Cu-Ni Black Bar Price per ton
- Cu-Ni Threaded Bar Chemical Structure
- Mechanical Behaviour of Cupro Nickel 90/10 Hexagonal Bar
- WERKSTOFF NR. 2.0872 Rectangular Bar Equivalent
- Copper Nickel Uns C70600 Flat Bar Testing
- Temperature Limit of Copper Nickel DIN 2.0872 Square Bar
90/10 Copper Nickel Round Bar Specification Chart
| Specifications | ASTM B151, ASME SB151 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Range | 5 To 500 milimeter thick in 100 TO 6000 milimeter |
| Cu-Ni 90/10 Round Bar | 6 to 120 milimeter. |
| Cu-Ni 90/10 Square Bar | 10 to 200 milimeter. |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 100 to 3660 milimeter Long |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
various Types of ASTM B151 Cuni 90/10 Rod
2 inch Cu-Ni 90/10 Hex Bar
WERKSTOFF NR. 2.0872 Copper Nickel Polished Bar
UNS C70600 Cu-Ni Square Bar
ASTM B151 90/10 Stainless Steel Bright Bar
140mm 60mm 90/10 Cupro Nickel Flat Bar
ASTM B151 90/10 Cu-Ni Threaded Bar
45mm Cupro Nickel 90/10 Bar
Accept all small/ Large Orders for Cupro Nickel 90/10 Cold Drawn and Hot Rolled Round Bar
Copper Nickel Din 2.0872 Rectangle Bar condition
| Flat bar – metric sizes and weights | |||
|---|---|---|---|
| Flat Size | KG’s per Metre | Standard Length (metres) | Colour Code |
| 10 x 3 | 0.24 | 6.0 | Blue |
| 13 x 3 | 0.31 | 6.0 | Blue |
| 13 x 5 | 0.46 | 6.0 | Orange |
| 16 x 3 | 0.38 | 6.0 | Blue |
| 16 x 5 | 0.64 | 6.0 | Orange |
| 16 x 8 | 1.03 | 6.0 | Red |
| 20 x 3 | 0.48 | 6.0 | Blue |
| 20 x 5 | 0.81 | 6.0 | Orange |
| 20 x 6 | 0.97 | 6.0 | White |
| 20 x 10 | 1.61 | 6.0 | Yellow |
| 25 x 3 | 0.60 | 6.0 | Blue |
| 25 x 5 | 1.01 | 6.0 | Orange |
| 25 x 6 | 1.21 | 6.0 | White |
| 25 x 8 | 1.61 | 6.0 | Red |
| 25 x 10 | 2.01 | 6.0 | Yellow |
| 25 x 12 | 2.41 | 6.0 | Pink |
| 32 x 3 | 0.77 | 6.0 | Blue |
| 32 x 5 | 1.29 | 6.0 | Orange |
| 32 x 6 | 1.55 | 6.0 | White |
| 32 x 8 | 2.06 | 6.0 | Red |
| 32 x 10 | 2.58 | 6.0 | Yellow |
| 32 x 12 | 3.09 | 6.0 | Pink |
| 40 x 3 | 0.97 | 6.0 | Blue |
| 40 x 5 | 1.61 | 6.0 | Orange |
| 40 x 6 | 1.93 | 6.0 | White |
| 40 x 8 | 2.58 | 6.0 | Red |
| 40 x 10 | 3.22 | 6.0 | Yellow |
| 40 x 12 | 3.86 | 6.0 | Pink |
| 40 x 16 | 5.15 | 6.0 | Grey |
| 40 x 20 | 6.14 | 6.0 | Green |
| 50 x 3 | 1.21 | 6.0 | Blue |
| 50 x 5 | 2.01 | 6.0 | Orange |
| 50 x 6 | 2.41 | 6.0 | White |
| 50 x 8 | 3.22 | 6.0 | Red |
| 50 x 10 | 4.02 | 6.0 | Yellow |
| 50 x 12 | 4.83 | 6.0 | Pink |
| 50 x 16 | 6.44 | 6.0 | Grey |
| 50 x 20 | 8.05 | 6.0 | Green |
| 50 x 25 | 10.1 | 6.0 | Purple |
| 65 x 3 | 1.57 | 6.0 | Blue |
| 65 x 5 | 2.62 | 6.0 | Orange |
| 65 x 6 | 3.14 | 6.0 | White |
| 65 x 8 | 4.18 | 6.0 | Red |
| 65 x 10 | 5.23 | 6.0 | Yellow |
| 65 x 12 | 6.28 | 6.0 | Pink |
| 65 x 16 | 8.37 | 6.0 | Grey |
| 65 x 20 | 10.5 | 6.0 | Green |
| 65 x 25 | 13.1 | 6.0 | Purple |
| 75 x 5 | 3.02 | 6.0 | Orange |
| 75 x 6 | 3.62 | 6.0 | White |
| 75 x 8 | 4.83 | 6.0 | Red |
| 75 x 10 | 6.04 | 6.0 | Yellow |
| 75 x 12 | 7.24 | 6.0 | Pink |
| 75 x 16 | 9.66 | 6.0 | Grey |
| 75 x 20 | 12.1 | 6.0 | Green |
| 75 x 25 | 15.1 | 6.0 | Purple |
| 75 x 40 | 24.1 | 6.0 | Yellow |
| 90 x 5 | 3.62 | 6.0 | Orange |
| 90 x 6 | 4.35 | 6.0 | White |
| 90 x 8 | 5.79 | 6.0 | Red |
| 90 x 10 | 7.24 | 6.0 | Yellow |
| 90 x 12 | 8.69 | 6.0 | Pink |
| 100 x 5 | 4.02 | 6.0 | Orange |
| 100 x 6 | 4.83 | 6.0 | White |
| 100 x 8 | 6.44 | 6.0 | Red |
| 100 x 10 | 8.05 | 6.0 | Yellow |
| 100 x 12 | 9.66 | 6.0 | Pink |
| 100 x 16 | 12.9 | 6.0 | Grey |
| 100 x 20 | 16.1 | 6.0 | Green |
| 100 x 25 | 20.1 | 6.0 | Purple |
| 100 x 50 | 40.2 | 6.0 | Green |
| 110 x 6 | 5.31 | 6.0 | White |
| 110 x 8 | 7.08 | 6.0 | Red |
| 110 x 10 | 8.85 | 6.0 | Yellow |
| 110 x 12 | 10.6 | 6.0 | Pink |
| 130 x 5 | 5.23 | 6.0 | Orange |
| 130 x 6 | 6.28 | 6.0 | White |
| 130 x 8 | 8.37 | 6.0 | Red |
| 130 x 10 | 10.5 | 6.0 | Yellow |
| 130 x 12 | 12.6 | 6.0 | Pink |
| 130 x 16 | 16.7 | 6.0 | Grey |
| 130 x 20 | 20.9 | 6.0 | Green |
| 130 x 25 | 26.2 | 6.0 | Purple |
| 150 x 5 | 6.04 | 6.0 | Orange |
| 150 x 6 | 7.24 | 6.0 | White |
| 150 x 8 | 9.66 | 6.0 | Red |
| 150 x 10 | 12.1 | 6.0 | Yellow |
| 150 x 12 | 14.5 | 6.0 | Pink |
| 150 x 16 | 19.3 | 6.0 | Grey |
| 150 x 20 | 24.1 | 6.0 | Green |
| 150 x 25 | 30.1 | 6.0 | Purple |
| 150 x 50 | 60.4 | 6.0 | Green |
| 180 x 5 | 7.24 | 6.0 | Orange |
| 180 x 6 | 8.69 | 6.0 | White |
| 180 x 10 | 14.5 | 6.0 | Yellow |
| 180 x 12 | 17.4 | 6.0 | Pink |
| 180 x 16 | 23.2 | 6.0 | Grey |
| 180 x 20 | 29.0 | 6.0 | Green |
| 180 x 25 | 36.2 | 6.0 | Purple |
| 200 x 6 | 9.66 | 6.0 | White |
| 200 x 8 | 12.9 | 6.0 | Red |
| 200 x 10 | 16.1 | 6.0 | Yellow |
| 200 x 12 | 19.3 | 6.0 | Pink |
| 200 x 16 | 25.7 | 6.0 | Grey |
| 200 x 20 | 32.2 | 6.0 | Green |
| 200 x 25 | 40.3 | 6.0 | Purple |
| 250 x 6 | 12.1 | 6.0 | White |
| 250 x 8 | 16.1 | 6.0 | Red |
| 250 x 10 | 20.1 | 6.0 | Yellow |
| 250 x 12 | 24.1 | 6.0 | Pink |
| 250 x 16 | 32.2 | 6.0 | Grey |
| 250 x 20 | 40.2 | 6.0 | Green |
| 250 x 25 | 50.3 | 6.0 | Purple |
| 300 x 6 | 14.5 | 6.0 | White |
| 300 x 8 | 19.3 | 6.0 | Red |
| 300 x 10 | 24.1 | 6.0 | Yellow |
| 300 x 12 | 29.0 | 6.0 | Pink |
| 300 x 16 | 38.6 | 6.0 | Grey |
| 300 x 20 | 48.3 | 6.0 | Green |
| 300 x 25 | 60.4 | 6.0 | Purple |
Cuni 90/10 Round Bar Sizes
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
| Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
| Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
| Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
| Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Cut to size on request (tolerance +2/-0 mm). 90/10 Copper Nickel Round Bar Standard lengths of 2000 mm up to 6000 mm.
| 5.0 | 45.0 |
| 6.0 | 50.0 |
| 7.0 | 55.0 |
| 8.0 | 60.0 |
| 9.0 | 65.0 |
| 10.0 | 70.0 |
| 12.0 | 75.0 |
| 16.0 | 80.0 |
| 20.0 | 90.0 |
| 25.0 | 100.0 |
| 30.0 | 130.0 |
| 35.0 | 160.0 |
| 40.0 | 200.0 |
Surface finish of 90/10 Cupro Nickel Forged Bar
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
Copper Nickel Din 2.0872 Rectangle Bar condition
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
Cupro Nickel 90/10 Round Bar Stockist
* CG - Centerless Ground HR RT - Hot Rolled Rough Turned |
3/16 CG 1/4 CG 5/16 CG 3/8 CG 1/2 CG 5/8 CG 3/4 CG 13/16 CG 7/8 CG 1 CG 1-1/8 CG 1-1/4 CG 1-3/8 CG 1-1/2 CG 1-3/4 CG |
2 CG 2-1/4 CG 2-1/2 CG 2-3/4 CG 3 CG 3-1/4 CG 3-1/2 CG 4 HR RT 4-1/2 HR RT 5 HR RT 6 HR RT 7 HR RT 8 HR RT 9 HR RT 10 HR RT |
Copper Nickel 90/10 Cold Drawn Round Bar Standard Chart
NAVINIC 30® CuNi30Mn1Fe |
||
|---|---|---|
| STANDARD | EN12163 / EN12165 / EN12167 / EN12420 DIN17672 BS2874 DEFSTAN 02-879 ANNEX B / NES780 / DEF STAN 02-780 STF 2255 / B007 |
|
| EUROPE | MATERIAL STANDARD |
CW354H 2.0882 CN107 |
| DELIVERY CONDITION | M / R370 / .1O / O / M | |
| STANDARD | ASTM B122 / ASTMB124 / ASTM B151 / ASTMB171 MILC 15726F / MILC 24679SH |
|
| UNITED STATES | MATERIAL STANDARD |
UNS C71500 / UNS C71520 |
| DELIVERY CONDITION | O / O60 / H01 / M30 |
composition of 90/10 Cu-ni Hot Rolled Round Bar
| UNS No. | Copper + Silver | Nickel + Cobalt | Manganese | Lead | Iron | Zinc | Phosphorus | Sulfur | Carbon |
|---|---|---|---|---|---|---|---|---|---|
| C71500 | remainder | 29.0-33.0 | 1.0 max | 0.05a max | 0.40-1.0 | 1.0a | |||
| C71520 | 65.0 min | 29.0-33.0 | 1.0 max | 0.02 | 0.40-1.0 | 0.5 | 0.02 max | 0.02 max | 0.05 max |
For subsequent welding application, max levels are: Zinc 0.50, Lead 0.02, Phosphorus 0.02, Sulfur 0.02, Carbon 0.05
MIL-C-15726
| MIL-C-15726 / MIL-T-16420 | UNS No. | Copper | Nickel + Cobalt | Manganese | Lead | Iron | Zinc | Phosphorus | Sulfur | Carbon | Cu + plus elements with specific limits, min |
|---|---|---|---|---|---|---|---|---|---|---|---|
| C71500 | 65.0 min | 29.0-33.0 | 1.0 max | 0.02 max | 0.40-1.0 | 0.50 max | 0.02 max | 0.02 max | 0.05 max | 99.5 |
MIL-T-15005
| UNS No. | Copper + Silver | Nickel + Cobalt | Manganese | Lead | Iron | Zinc | Phosphorus | Sulfur | Carbon |
|---|---|---|---|---|---|---|---|---|---|
| C71500 | remainder | 29.0-33.0 | 1.0 max | 0.02 max | 0.40-1.0 | 0.50 max | 0.02 max | 0.02 max | 0.05 max |
Physical composition of Cu-ni 90/10 Bright Bar
| Density @ 68° F | 0.323 lb/in3 |
| Melting Range | 2140-2265o F |
| Hot Formability | Good |
| Cold Formability | Good |
| Machinability rating (C360 = 100) | 20 |
| Brazing | Excellent |
| Soldering | Excellent |
| Gas-shielded arc welding | Excellent |
| Oxy-acetylene welding | Good |
| Carbon-arc welding | Not recommended |
| Coated metal-arc welding | Good |
| Resistant welding: spot and seam | Good |
| Resistance Welding: butt | Good |
Sizes of Copper Nickel WERKSTOFF NR. 2.0872 Square Bar
| Square bar – metric sizes and weights | |||
|---|---|---|---|
| Square bar Size | KG’s per Metre | Standard Length (metres) | Colour Code |
| 10 x 10 | 0.81 | 6.0 | Yellow |
| 12 x 12 | 1.16 | 6.0 | Pink |
| 16 x 16 | 2.06 | 6.0 | Grey |
| 20 x 20 | 3.22 | 6.0 | Green |
| 25 x 25 | 5.03 | 6.0 | Purple |
| 32 x 32 | 8.24 | 6.0 | Orange |
| 40 x 40 | 12.8 | 6.0 | Yellow |
| 50 x 50 | 20.12 | 6.0 | Green |
Size Chart of Cupro Nickel UNS C70600 Hex Bar
| Size in Inches | Wt per Ft | Wt per 12′ |
|---|---|---|
| 3/16 | 0.104 | 1.248 |
| 1/4 | 0.180 | 2.160 |
| 5/16 | 0.290 | 3.480 |
| 3/8 | 0.410 | 4.920 |
| 7/16 | 0.560 | 6.72 |
| 1/2 | 0.740 | 8.880 |
| 9/16 | 0.930 | 11.16 |
| 5/8 | 1.150 | 13.80 |
| 11/16 | 1.390 | 16.68 |
| 3/4 | 1.660 | 19.92 |
| 13/16 | 1.950 | 23.40 |
| 7/8 | 2.300 | 27.60 |
| 15/16 | 2.600 | 31.20 |
| 1 | 2.90 | 34.80 |
| 1-1/16 | 3.30 | 39.60 |
| 1-1/8 | 3.700 | 44.40 |
| 1-1/4 | 4.600 | 55.20 |
| 1-5/16 | 5.100 | 61.20 |
| 1-3/8 | 5.600 | 67.20 |
| 1-7/16 | 6.100 | 73.20 |
| 1-1/2 | 6.600 | 79.20 |
| 1-5/8 | 7.800 | 93.60 |
| 1-3/4 | 9.030 | 108.36 |
| 1-7/8 | 10.400 | 124.80 |
| 2 | 11.80 | 141.60 |
| 2-1/4 | 14.920 | 179.04 |
| 2-3/8 | 16.920 | 203.04 |
| 2-1/2 | 18.42 | 221.04 |
| 3 | 26.53 | 318.36 |
ASME SB151 Cu-ni 90/10 Hollow Bar Size
| Size in milimeter | kg/m | Size in milimeter | kg/m |
| 20 x 20 x 2.0 | 1.12 | 20 x 20 x 2.5 | 1.35 |
| 25 x 25 x 1.5 | 1.06 | 25 x 25 x 2.0 | 1.43 |
| 25 X 25 X 2.5 | 1.74 | 25 X 25 X 3.0 | 2.04 |
| 30 X 30 X 2.0 | 1.68 | 30 X 30 X 2.5 | 2.14 |
| 30 X 30 X 3.0 | 2.51 | 40 x 40 x 1.5 | 1.81 |
| 40 x 40 x 2.0 | 2.31 | 40 x 40 x 2.5 | 2.92 |
| 40 x 40 x 3.0 | 3.45 | 40 x 40 x 4.0 | 4.46 |
| 40 x 40 x 5.0 | 5.40 | 50 x 50 x 1.5 | 2.28 |
| 50 x 50 x 2.0 | 2.93 | 50 x 50 x 2.5 | 3.71 |
| 50 x 50 x 3.0 | 4.39 | 50 x 50 x 4.0 | 5.72 |
| 50 x 50 x 5.0 | 6.97 | 60 x 60 x 3.0 | 5.34 |
| 60 x 60 x 4.0 | 6.97 | 60 x 60 x 5.0 | 8.54 |
| 60 x 60 x 6.0 | 9.45 | 70 x 70 x 3.0 | 6.28 |
| 70 x 70 x 3.6 | 7.46 | 70 x 70 x 5.0 | 10.11 |
| 70 x 70 x 6.3 | 12.50 | 70 x 70 x 8 | 15.30 |
| 75 x 75 x 3.0 | 7.07 | 80 x 80 x 3.0 | 7.22 |
| 80 x 80 x 3.6 | 8.59 | 80 x 80 x 5.0 | 11.70 |
| 80 x 80 x 6.0 | 13.90 | 90 x 90 x 3.0 | 8.01 |
| 90 x 90 x 3.6 | 9.72 | 90 x 90 x 5.0 | 13.30 |
| 90 x 90 x 6.0 | 15.76 | 90 x 90 x 8.0 | 20.40 |
| 100 x 100 x 3.0 | 8.96 | 100 x 100 x 4.0 | 12.00 |
| 100 x 100 x 5.0 | 14.80 | 100 x 100 x 5.0 | 14.80 |
| 100 x 100 x 6.0 | 16.19 | 100 x 100 x 8.0 | 22.90 |
| 100 x 100 x 10 | 27.90 | 120 x 120 x 5 | 18.00 |
| 120 x 120 x 6.0 | 21.30 | 120 X 120 X 6.3 | 22.30 |
| 120 x 120 x 8.0 | 27.90 | 120 x 120 x 10 | 34.20 |
| 120 X 120 X 12 | 35.8 | 120 X 120 X 12.5 | 41.60 |
| 140 X 140 X 5.0 | 21.10 | 140 X 140 X 6.3 | 26.30 |
| 140 X 140 X 8 | 32.90 | 140 X 140 X 10 | 40.40 |
| 140 X 140 X 12.5 | 49.50 | 150 X 150 X 5.0 | 22.70 |
| 150 X 150 X 6.3 | 28.30 | 150 X 150 X 8.0 | 35.40 |
| 150 X 150 X 10 | 43.60 | 150 X 150 X 12.5 | 53.40 |
| 150 X 150 X 16 | 66.40 | 150 X 150 X 16 | 66.40 |
| 180 X 180 X 5 | 27.40 | 180 X 180 X 6.3 | 34.20 |
| 180 X 180 X 8 | 43.00 | 180 X 180 X 10 | 53.00 |
| 180 X 180 X 12.5 | 65.20 | 180 X 180 X 16 | 81.40 |
| 200 X 200 X 5 | 30.50 | 200 X 200 X 6 | 35.8 |
| 200 x 200 x 6.3 | 38.2 | 200 x 200 x 8 | 48.00 |
| 200 x 200 x 10 | 59.30 | 200 x 200 x 12.5 | 73.00 |
| 200 x 200 x 16 | 91.50 | 250 x 250 x 6.3 | 48.10 |
| 250 x 250 x 8 | 60.50 | 250 x 250 x 10 | 75.00 |
| 250 x 250 x 12.5 | 92.60 | 250 x 250 x 16 | 117.00 |
| 300 x 300 x 6.3 | 57.90 | 300 x 300 x 8 | 73.10 |
| 300 x 300 x 10 | 57.90 | 300 x 300 x 8 | 90.70 |
| 300 x 300 x 12.5 | 112.00 | 300 x 300 x 16 | 142.00 |
| 350 x 350 x 8 | 85.70 | 350 x 350 x 10 | 106.00 |
| 350 x 350 x 12.5 | 132.00 | 350 x 350 x 16 | 167.00 |
| 400 x 400 x 10 | 122.00 | 400 x 400 x 12 | 141.00 |
| 400 x 400 x 12.5mm | 152.00 | 400 x 400 x 16 | 192 |
Tolerance List of Copper Nickel 90/10 Cold Rolled Round Bar
Diameter – Smooth Turned
(These are H10 tolerances, which are ‘all minus’ tolerances )
| Diameter (milimeter) | Tolerance (milimeter) |
|---|---|
| 18 to 30 | +0 / -0.084 |
| 31 to 50 | +0 / -0.100 |
| 51 to 79 | +0 / -0.120 |
Diameter – Rough Turned
(These are ‘all plus’ tolerances)
| Diameter (mm) | Tolerance (mm) |
|---|---|
| 75 to 150 | -0 / +1.5 |
| 151 to 225 | -0 / +2.0 |
| 226 to 410 | -0 / +3.0 |
Diameter – Bright Drawn
These are H9 Tolerances
H9 Tolerances are ‘all minus’ tolerances:
+0mm / – Figure in table
| Diameter (mm) | Tolerance (mm) |
|---|---|
| 6 to 10 | +0 / -0.036 |
| 11 to 18 | +0 / -0.043 |
| 19 to 30 | +0 / -0.052 |
Tolerance In Mm For Given Tolerance Number
| Diameter (mm) | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| >1 to 3 inc. | 0.007 | 0.009 | 0.014 | 0.025 | 0.040 | 0.060 | 0.090 | 0.140 |
| >3 to 6 inc. | 0.008 | 0.012 | 0.018 | 0.030 | 0.048 | 0.075 | 0.120 | 0.180 |
| >6 to 10 inc. | 0.009 | 0.015 | 0.022 | 0.036 | 0.058 | 0.090 | 0.150 | 0.220 |
| >10 to 18 inc. | 0.011 | 0.018 | 0.027 | 0.043 | 0.070 | 0.110 | 0.180 | 0.270 |
| >18 to 30 inc. | 0.013 | 0.021 | 0.033 | 0.052 | 0.084 | 0.130 | 0.210 | 0.330 |
| >30 to 50 inc. | 0.016 | 0.025 | 0.039 | 0.062 | 0.100 | 0.160 | 0.250 | 0.390 |
| >50 to 80 inc. | 0.019 | 0.046 | 0.074 | 0.120 | 0.190 | 0.300 | 0.460 | |
| >80 to 120 inc. | 0.022 | 0.087 | 0.140 | 0.220 | 0.350 | 0.540 | ||
| >120 to 180 inc. | 0.025 | 0.100 | 0.160 | 0.250 | 0.400 | 0.630 | ||
| >180 to 250 inc. | 0.115 | 0.185 | 0.290 | 0.460 | 0.720 | |||
| >250 to 315 inc. | 0.320 | 0.520 | 0.810 | |||||
| >315 to 400 inc. | 0.360 | 0.570 | 0.890 | |||||
| >400 to 500 inc. | 0.400 | 0.630 | 0.970 | |||||
| > 500 | 0.440 | 0.700 | 1.100 |
Tolerances on cross sections
| Nominal dimension | Tolerance class to ISO 286-2 | ||||||
|---|---|---|---|---|---|---|---|
| h6 | h7 | h8 | h9 | h10 | h11 | h12 | |
| over 1 up to 3 | 0.006 | 0.010 | 0.014 | 0.025 | 0.040 | 0.060 | 0.100 |
| over 3 up to 6 | 0.008 | 0.012 | 0.018 | 0.030 | 0.048 | 0.075 | 0.120 |
| over 6 up to 10 | 0.009 | 0.015 | 0.022 | 0.036 | 0.058 | 0.090 | 0.150 |
| over 10 up to 18 | 0.011 | 0.018 | 0.027 | 0.043 | 0.070 | 0.110 | 0.180 |
| over 18 up to 30 | 0.013 | 0.021 | 0.033 | 0.052 | 0.084 | 0.130 | 0.210 |
| over 30 up to 50 | 0.016 | 0.025 | 0.039 | 0.062 | 0.100 | 0.160 | 0.250 |
| over 50 up to 80 | 0.019 | 0.030 | 0.046 | 0.074 | 0.120 | 0.190 | 0.300 |
| over 80 up to 120 | 0.022 | 0.035 | 0.054 | 0.087 | 0.140 | 0.220 | 0.350 |
| over 120 up to 180 | 0.025 | 0.040 | 0.063 | 0.100 | 0.160 | 0.250 | 0.400 |
| over 180 up to 200 | 0.029 | 0.046 | 0.072 | 0.115 | 0.185 | 0.290 | 0.460 |
Tolerances on length
| Type of length | Length | Limit deviation | To be stated on order |
|---|---|---|---|
| Manufacturing length | 3000 to 9000 | +/- 500 | Length |
| Stock length | 3000 or 6000 | 0, +200 | eg 6000 |
| Cut to length | Up to 9000 | To specifications with +/- 5 minimum | Length and tolerance |
Tolerances on straightness
| Product form | Nominal dimension | Deviation |
|---|---|---|
| Rounds | – | 1.0 |
| Squares and hexagons | up to 75 | 1.0 |
| over 75 | 1.5 | |
| Flats | width below 120 | 1.5 on width / 2.0 on thickness |
| width at or over 120 and w/t below 10:1 | 2.0 on width / 2.5 on thickness | |
| width at and over 120 and w/t at or over 10:1 | 2.5 on width / 3.0 on thickness |
ASTM B151 90/10 Cu-Ni Threaded Bar Processing
- Heat Resistance
- Fabrication
- Cold Working
- Hot Working
- Heat Treatment
- Machining Welding
Application Industries of 90/10 Copper Nickel Rods
- Petrochemical
- Chemical
- Oil and Gas
- Pulp & Paper Indusry
- Power Plant
- Food Processing
- Pharmaceuticals
- Energy
- Aerospace
Purchase 90/10 Cu-ni Bright Bar and Threaded Rod at best Price
90/10 Cu-Ni Black Bar Price per ton
| CuNi 90/10 Round Bar Price List | Coppr Nickel 90/10 Rod Price |
|---|---|
| Copper Nickel 90/10 Hex Bar / Rod | $257.52 |
| CuNi 90/10 Hex Bar / Rod | $366.11 |
| Cupro Nickel 90/10 Flat Bar | $172.65 |
| CuNi 90/10 Rod | $417.12 |
Check Mechanical and Chemical Properties of UNS C70600 Flat and Rectangular Bar
Cu-Ni Threaded Bar Chemical Structure
| Element | Cu - Ni 90/10 |
| Cu | 88.6 min |
| Pb | .05 maximum |
| Mn | 1.0 maximum |
| Fe | 1.8 maximum |
| Zn | 1 maximum |
| Ni | 9-11 maximum |
Mechanical Behaviour of Cupro Nickel 90/10 Hexagonal Bar
| Element | Copper Nickel 90/10 Bar |
| Density | 8.1 g/cm3 |
| Melting Point | 1443 °C (2430 °F) |
| Tensile Strength | Psi -80,000, MPa -551 |
| Yield Strength (0.2%Offset) | Psi - 35,000, MPa - 241 |
| Elongation | 30 % |
WERKSTOFF NR. 2.0872 Rectangular Bar Equivalent
| STANDARD | WERKSTOFF NR. | UNS |
| Copper Nickel Cu-Ni 90/10 | 2.0872 | C70600 |
Copper Nickel Uns C70600 Flat Bar Testing
- Chemical examination
- Radiographic Test
- Pitting Corrosion Test
- Positive material recognition
- Eddy Current test
- Buckling & Crushing test
Temperature Limit of Copper Nickel DIN 2.0872 Square Bar
Maximum metal temperature 325°C for 90/10 copper nickel Bar