Check Alloy 718 Hex Bar Weight Chart, Suppliers of UNS N07718 Rod

View Specification & Standards of ASME SB 637 DIN 2.4668 Flat & Square Bar

Inconel 718 Round Bar

Inconel 718 Round Bar

ASTM B637 UNS N07718 Hex Bar

ASTM B637 UNS N07718 Hex Bar

Alloy 718 Rod

Alloy 718 Rod

Inconel 718 Round Bar Spec

718 Inconel Rod Specifications EN, DIN, JIS, ASTM, BS, ASME, AISI
Inconel UNS N07718 Hex Bar Standard Specification ASTM B446 / ASME SB446
Size of Inconel WERKSTOFF NR. 2.4668 Round Rod in MM 5 mm To 500 mm
718 Inconel Bright Bar Diameter 0.1 mm to 100 mm
ASTM B637 Inconel 718 Flat Bars Length 100 mm To 3000 mm Long & Abov
Inconel Alloy 718 Hollow Bars Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Grade of ASTM B637 Alloy 718 Forged Round Bars Inconel 718 (UNS No. N07718) Round Bar 2.4668
Surface Finish of UNS N07718 Inconel Square Bars Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
inconel 718 rectangular bars Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Alloy 718 Cold Drawn Bar Surface Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Application of Inconel 718 Hex Bar Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining, Waste treatment facilities
WERKSTOFF NR. 2.4668 Forged Bars Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.

Common Types of ASTM B637 UNS N07718 Hex Bar

Inconel 718 Inconel Bright Round Bars 100 200 300mm

Inconel 718 Inconel Bright Round Bar 100 200 300mm

ASTM ASME low hot rolled Inconel 718 alloy steel round bar

ASTM ASME low hot rolled Inconel 718 alloy steel round bar

UNS N07718 DIN W. Nr. 2.4668 Inconel 718 round bar

UNS N07718 DIN W. Nr. 2.4668 Inconel 718 round bar

Cold Drawn Bright Astm B637 Inconel 718 Alloy Steel Round Bar

Cold Drawn Bright Astm B637 Inconel 718 Alloy Steel Round Bar

Uns N07718 Inconel 718 2.4668 Nickel Alloy Steel Round Hollow Bar

Uns N07718 Inconel 718 2.4668 Nickel Alloy Steel Round Hollow Bar

13mm Steel Rod 36crnimo4 Nickel Alloy 718 Round Bar

13mm Steel Rod 36crnimo4 Nickel Alloy 718 Round Bar

Gh4169 Inconel 718 Nickel Alloy 25mm Steel Round Bar

Gh4169 Inconel 718 Nickel Alloy 25mm Steel Round Bar

Uns N07718 W.nr. 2.4668 Inconel 718 Nickel Alloy Steel Flat Bar

Uns N07718 W.nr. 2.4668 Inconel 718 Nickel Alloy Steel Flat Bar

Inconel 718 Nickel Alloy Bar

Inconel 718 Nickel Alloy Bar

Surface Finish Alloy 718 Rod

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

Alloy 718 Bar Condition

H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

Size chart of Inconel 718 Flat Bar

Inconel 718 Flat bar – metric sizes and weights
Flat Size KG’s per Metre Standard Length (metres) Colour Code
10 x 3 0.24 6.0 Blue
13 x 3 0.31 6.0 Blue
13 x 5 0.46 6.0 Orange
16 x 3 0.38 6.0 Blue
16 x 5 0.64 6.0 Orange
16 x 8 1.03 6.0 Red
20 x 3 0.48 6.0 Blue
20 x 5 0.81 6.0 Orange
20 x 6 0.97 6.0 White
20 x 10 1.61 6.0 Yellow
25 x 3 0.60 6.0 Blue
25 x 5 1.01 6.0 Orange
25 x 6 1.21 6.0 White
25 x 8 1.61 6.0 Red
25 x 10 2.01 6.0 Yellow
25 x 12 2.41 6.0 Pink
32 x 3 0.77 6.0 Blue
32 x 5 1.29 6.0 Orange
32 x 6 1.55 6.0 White
32 x 8 2.06 6.0 Red
32 x 10 2.58 6.0 Yellow
32 x 12 3.09 6.0 Pink
40 x 3 0.97 6.0 Blue
40 x 5 1.61 6.0 Orange
40 x 6 1.93 6.0 White
40 x 8 2.58 6.0 Red
40 x 10 3.22 6.0 Yellow
40 x 12 3.86 6.0 Pink
40 x 16 5.15 6.0 Grey
40 x 20 6.14 6.0 Green
50 x 3 1.21 6.0 Blue
50 x 5 2.01 6.0 Orange
50 x 6 2.41 6.0 White
50 x 8 3.22 6.0 Red
50 x 10 4.02 6.0 Yellow
50 x 12 4.83 6.0 Pink
50 x 16 6.44 6.0 Grey
50 x 20 8.05 6.0 Green
50 x 25 10.1 6.0 Purple
65 x 3 1.57 6.0 Blue
65 x 5 2.62 6.0 Orange
65 x 6 3.14 6.0 White
65 x 8 4.18 6.0 Red
65 x 10 5.23 6.0 Yellow
65 x 12 6.28 6.0 Pink
65 x 16 8.37 6.0 Grey
65 x 20 10.5 6.0 Green
65 x 25 13.1 6.0 Purple
75 x 5 3.02 6.0 Orange
75 x 6 3.62 6.0 White
75 x 8 4.83 6.0 Red
75 x 10 6.04 6.0 Yellow
75 x 12 7.24 6.0 Pink
75 x 16 9.66 6.0 Grey
75 x 20 12.1 6.0 Green
75 x 25 15.1 6.0 Purple
75 x 40 24.1 6.0 Yellow
90 x 5 3.62 6.0 Orange
90 x 6 4.35 6.0 White
90 x 8 5.79 6.0 Red
90 x 10 7.24 6.0 Yellow
90 x 12 8.69 6.0 Pink
100 x 5 4.02 6.0 Orange
100 x 6 4.83 6.0 White
100 x 8 6.44 6.0 Red
100 x 10 8.05 6.0 Yellow
100 x 12 9.66 6.0 Pink
100 x 16 12.9 6.0 Grey
100 x 20 16.1 6.0 Green
100 x 25 20.1 6.0 Purple
100 x 50 40.2 6.0 Green
110 x 6 5.31 6.0 White
110 x 8 7.08 6.0 Red
110 x 10 8.85 6.0 Yellow
110 x 12 10.6 6.0 Pink
130 x 5 5.23 6.0 Orange
130 x 6 6.28 6.0 White
130 x 8 8.37 6.0 Red
130 x 10 10.5 6.0 Yellow
130 x 12 12.6 6.0 Pink
130 x 16 16.7 6.0 Grey
130 x 20 20.9 6.0 Green
130 x 25 26.2 6.0 Purple
150 x 5 6.04 6.0 Orange
150 x 6 7.24 6.0 White
150 x 8 9.66 6.0 Red
150 x 10 12.1 6.0 Yellow
150 x 12 14.5 6.0 Pink
150 x 16 19.3 6.0 Grey
150 x 20 24.1 6.0 Green
150 x 25 30.1 6.0 Purple
150 x 50 60.4 6.0 Green
180 x 5 7.24 6.0 Orange
180 x 6 8.69 6.0 White
180 x 10 14.5 6.0 Yellow
180 x 12 17.4 6.0 Pink
180 x 16 23.2 6.0 Grey
180 x 20 29.0 6.0 Green
180 x 25 36.2 6.0 Purple
200 x 6 9.66 6.0 White
200 x 8 12.9 6.0 Red
200 x 10 16.1 6.0 Yellow
200 x 12 19.3 6.0 Pink
200 x 16 25.7 6.0 Grey
200 x 20 32.2 6.0 Green
200 x 25 40.3 6.0 Purple
250 x 6 12.1 6.0 White
250 x 8 16.1 6.0 Red
250 x 10 20.1 6.0 Yellow
250 x 12 24.1 6.0 Pink
250 x 16 32.2 6.0 Grey
250 x 20 40.2 6.0 Green
250 x 25 50.3 6.0 Purple
300 x 6 14.5 6.0 White
300 x 8 19.3 6.0 Red
300 x 10 24.1 6.0 Yellow
300 x 12 29.0 6.0 Pink
300 x 16 38.6 6.0 Grey
300 x 20 48.3 6.0 Green
300 x 25 60.4 6.0 Purple

Alloy Inconel 718 Square Bar sizes

Square bar – metric sizes and weights
Square bar Size KG’s per Metre Standard Length (metres) Colour Code
10 x 10 0.81 6.0 Yellow
12 x 12 1.16 6.0 Pink
16 x 16 2.06 6.0 Grey
20 x 20 3.22 6.0 Green
25 x 25 5.03 6.0 Purple
32 x 32 8.24 6.0 Orange
40 x 40 12.8 6.0 Yellow
50 x 50 20.12 6.0 Green

size of Inconel Werkstoff Nr. 2.4668 Hexagonal Bars

Size in Inches Wt per Ft Wt per 12′
3/16 0.104 1.248
1/4 0.180 2.160
5/16 0.290 3.480
3/8 0.410 4.920
7/16 0.560 6.72
1/2 0.740 8.880
9/16 0.930 11.16
5/8 1.150 13.80
11/16 1.390 16.68
3/4 1.660 19.92
13/16 1.950 23.40
7/8 2.300 27.60
15/16 2.600 31.20
1 2.90 34.80
1-1/16 3.30 39.60
1-1/8 3.700 44.40
1-1/4 4.600 55.20
1-5/16 5.100 61.20
1-3/8 5.600 67.20
1-7/16 6.100 73.20
1-1/2 6.600 79.20
1-5/8 7.800 93.60
1-3/4 9.030 108.36
1-7/8 10.400 124.80
2 11.80 141.60
2-1/4 14.920 179.04
2-3/8 16.920 203.04
2-1/2 18.42 221.04
3 26.53 318.36

Sb637 Inconel 718 Hollow Bar Size

Size kg/m Size kg/m
20 x 20 x 2.0 1.12 20 x 20 x 2.5 1.35
25 x 25 x 1.5 1.06 25 x 25 x 2.0 1.43
25 X 25 X 2.5 1.74 25 X 25 X 3.0 2.04
30 X 30 X 2.0 1.68 30 X 30 X 2.5 2.14
30 X 30 X 3.0 2.51 40 x 40 x 1.5 1.81
40 x 40 x 2.0 2.31 40 x 40 x 2.5 2.92
40 x 40 x 3.0 3.45 40 x 40 x 4.0 4.46
40 x 40 x 5.0 5.40 50 x 50 x 1.5 2.28
50 x 50 x 2.0 2.93 50 x 50 x 2.5 3.71
50 x 50 x 3.0 4.39 50 x 50 x 4.0 5.72
50 x 50 x 5.0 6.97 60 x 60 x 3.0 5.34
60 x 60 x 4.0 6.97 60 x 60 x 5.0 8.54
60 x 60 x 6.0 9.45 70 x 70 x 3.0 6.28
70 x 70 x 3.6 7.46 70 x 70 x 5.0 10.11
70 x 70 x 6.3 12.50 70 x 70 x 8 15.30
75 x 75 x 3.0 7.07 80 x 80 x 3.0 7.22
80 x 80 x 3.6 8.59 80 x 80 x 5.0 11.70
80 x 80 x 6.0 13.90 90 x 90 x 3.0 8.01
90 x 90 x 3.6 9.72 90 x 90 x 5.0 13.30
90 x 90 x 6.0 15.76 90 x 90 x 8.0 20.40
100 x 100 x 3.0 8.96 100 x 100 x 4.0 12.00
100 x 100 x 5.0 14.80 100 x 100 x 5.0 14.80
100 x 100 x 6.0 16.19 100 x 100 x 8.0 22.90
100 x 100 x 10 27.90 120 x 120 x 5 18.00
120 x 120 x 6.0 21.30 120 X 120 X 6.3 22.30
120 x 120 x 8.0 27.90 120 x 120 x 10 34.20
120 X 120 X 12 35.8 120 X 120 X 12.5 41.60
140 X 140 X 5.0 21.10 140 X 140 X 6.3 26.30
140 X 140 X 8 32.90 140 X 140 X 10 40.40
140 X 140 X 12.5 49.50 150 X 150 X 5.0 22.70
150 X 150 X 6.3 28.30 150 X 150 X 8.0 35.40
150 X 150 X 10 43.60 150 X 150 X 12.5 53.40
150 X 150 X 16 66.40 150 X 150 X 16 66.40
180 X 180 X 5 27.40 180 X 180 X 6.3 34.20
180 X 180 X 8 43.00 180 X 180 X 10 53.00
180 X 180 X 12.5 65.20 180 X 180 X 16 81.40
200 X 200 X 5 30.50 200 X 200 X 6 35.8
200 x 200 x 6.3 38.2 200 x 200 x 8 48.00
200 x 200 x 10 59.30 200 x 200 x 12.5 73.00
200 x 200 x 16 91.50 250 x 250 x 6.3 48.10
250 x 250 x 8 60.50 250 x 250 x 10 75.00
250 x 250 x 12.5 92.60 250 x 250 x 16 117.00
300 x 300 x 6.3 57.90 300 x 300 x 8 73.10
300 x 300 x 10 57.90 300 x 300 x 8 90.70
300 x 300 x 12.5 112.00 300 x 300 x 16 142.00
350 x 350 x 8 85.70 350 x 350 x 10 106.00
350 x 350 x 12.5 132.00 350 x 350 x 16 167.00
400 x 400 x 10 122.00 400 x 400 x 12 141.00
400 x 400 x 12.5 152.00 400 x 400 x 16 192

View Dimension & Tolerance Chart of Nickel Alloy 718 Forged, Hot Rolled and Cold Drawn Round Bars

718 Inconel Alloy Polished Bar Tolerance

Diameter – Smooth Turned

(These are H10 tolerances, which are ‘all minus’ tolerances )

Diameter (mm) Tolerance (mm)
18 to 30 +0 / -0.084
31 to 50 +0 / -0.100
51 to 79 +0 / -0.120

Diameter – Rough Turned

(These are ‘all plus’ tolerances)

Diameter (mm) Tolerance (mm)
75 to 150 -0 / +1.5
151 to 225 -0 / +2.0
226 to 410 -0 / +3.0

Diameter – Bright Drawn

These are H9 Tolerances
H9 Tolerances are ‘all minus’ tolerances:

+0mm / – Figure in table

Diameter (mm) Tolerance (mm)
6 to 10 +0 / -0.036
11 to 18 +0 / -0.043
19 to 30 +0 / -0.052
Tolerance In Mm For Given Tolerance Number

Diameter (mm) 6 7 8 9 10 11 12 13
>1 to 3 inc. 0.007 0.009 0.014 0.025 0.040 0.060 0.090 0.140
>3 to 6 inc. 0.008 0.012 0.018 0.030 0.048 0.075 0.120 0.180
>6 to 10 inc. 0.009 0.015 0.022 0.036 0.058 0.090 0.150 0.220
>10 to 18 inc. 0.011 0.018 0.027 0.043 0.070 0.110 0.180 0.270
>18 to 30 inc. 0.013 0.021 0.033 0.052 0.084 0.130 0.210 0.330
>30 to 50 inc. 0.016 0.025 0.039 0.062 0.100 0.160 0.250 0.390
>50 to 80 inc. 0.019 0.046 0.074 0.120 0.190 0.300 0.460
>80 to 120 inc. 0.022 0.087 0.140 0.220 0.350 0.540
>120 to 180 inc. 0.025 0.100 0.160 0.250 0.400 0.630
>180 to 250 inc. 0.115 0.185 0.290 0.460 0.720
>250 to 315 inc. 0.320 0.520 0.810
>315 to 400 inc. 0.360 0.570 0.890
>400 to 500 inc. 0.400 0.630 0.970
> 500 0.440 0.700 1.100

Tolerances on cross sections

Nominal dimension Tolerance class to ISO 286-2
h6 h7 h8 h9 h10 h11 h12
over 1 up to 3 0.006 0.010 0.014 0.025 0.040 0.060 0.100
over 3 up to 6 0.008 0.012 0.018 0.030 0.048 0.075 0.120
over 6 up to 10 0.009 0.015 0.022 0.036 0.058 0.090 0.150
over 10 up to 18 0.011 0.018 0.027 0.043 0.070 0.110 0.180
over 18 up to 30 0.013 0.021 0.033 0.052 0.084 0.130 0.210
over 30 up to 50 0.016 0.025 0.039 0.062 0.100 0.160 0.250
over 50 up to 80 0.019 0.030 0.046 0.074 0.120 0.190 0.300
over 80 up to 120 0.022 0.035 0.054 0.087 0.140 0.220 0.350
over 120 up to 180 0.025 0.040 0.063 0.100 0.160 0.250 0.400
over 180 up to 200 0.029 0.046 0.072 0.115 0.185 0.290 0.460

Tolerances on length

Type of length Length Limit deviation To be stated on order
Manufacturing length 3000 to 9000 +/- 500 Length
Stock length 3000 or 6000 0, +200 eg 6000
Cut to length Up to 9000 To specifications with +/- 5 minimum Length and tolerance

Tolerances on straightness

Product form Nominal dimension Deviation
Rounds 1.0
Squares and hexagons up to 75 1.0
over 75 1.5
Flats width below 120 1.5 on width / 2.0 on thickness
width at or over 120 and w/t below 10:1 2.0 on width / 2.5 on thickness
width at and over 120 and w/t at or over 10:1 2.5 on width / 3.0 on thickness

Hot Rolled Inconel 718 Round Bar Chemical Structure

Grade C Mn Si Cu S Fe Mo Ni Cr
Inconel 625 0.08 max 0.35 max 0.35 max 0.30 max 0.15 min 50.0-55.0 min 17.0–21.0

Mechanical Properties of Alloy 718 Cold Drawn Round Bar

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.2 g/cm3 1.350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

WERKSTOFF NR. 2.4668 Forged Bar Equivalent Grade

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 N07718 NCF 718

718 Inconel Alloy Bar ASTM Specification

ASTM A479 It includes hot and cold finished ss bar, including squares, rounds, and hexagons, and hot rolled or extruded shapes, such as tees, angles, and channels.
ASTM A276 It encompasses hot-finished or cold-finished bar, including squares, rounds, and hexagons, and hot rolled or extruded shapes, such as tees, angles, and channels in the more widely used types of SS.
ASTM A484 It includes wrought ss bar, forgings, shapes, and billets or other except wire, semi-finished materials, for forging. The product are available in four types of conditions.
ASTM B473 It includes ni alloy bar & wire, which can be produced in a stabilized-annealed condition, solution-annealed condition or annealed condition.
ASTM A582 It includes hot and cold finished ss bars, including squares, rounds, and hexagons, from common types of SS free-machining.
Check properties & Weight of JIS NCF 718 Polished and Rectangular Bars

Weight of 2.4668 Inconel 718 Polished Bar

Size Kilograms / Foot Kilograms / Meter Size Kilograms / Foot Kilograms / Meter Size Kilograms / Foot Kilograms / Meter
3 0.017 0.055 20 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4 0.030 0.098 24 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25 1.180 3.871 4" 19.306 63.340
5 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26 1.271 4.170 4-1/2" 24.4487 80.340
6 0.068 0.223 27 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7 0.091 0.298 30 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8 0.120 0.398 32 1.894 6.314 6-1/2" 51.093 167.630
9 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35 2.390 7.553 7-1/2" 68.226 225.000
10 0.189 0.620 36 2.438 7.999 8" 77.586 254.55
11 0.228 0.748 38 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951      
12 0.271 0.889 40 3.009 9.872      
1/2" 0.303 0.994 1-5/8" 3.200 10.449      
13 0.318 1.043 1-3/4" 3.712 12.179      
14 0.368 1.207 45 3.807 12.555      
9/16" 0.383 1.256 1-7/8" 4.260 13.977      
15 0.424 1.391 48 4.330 14.205      
5/8" 0.473 1.551 50 4.698 15.414      
16 0.481 1.578 2" 4.848 15.906      
17 0.543 1.791 2-1/8" 5.475 17.963      
11/16" 0.573 1.880 2-1/4" 6.135 20.128      
18 0.610 2.001 60 6.768 22.205      
3/4" 0.682 2.237 2-3/8" 6.838 22.435      
      2-1/2" 7.576 24.856      
      2-5/8" 8.354 27.409      
      2-3/4" 9.169 30.083

Price of ASTM B637 Inconel 718 Annealed Bar

Price of Nickel Alloy 718 Round Bar Nickel 718 Round Bar Price in USD
ROUND BAR INCONEL NICKEL ALLOY 718 API-120, SIZE: 25.4MM DIA X 1016 $31.94
ROUND BAR/INCONEL 718, AMS 5662, 25.5MM DIA X 3450-3850MM,52 PCS( HR-SOLUTION ANNEALED-SMOOTH TURNED) $27.78
NICKEL ALLOY ROUND BAR INCONEL 718 ( SIZE: 76.20 MM) $20.99
INCONEL 718 BAR - DIA 57.15 $35.75
Machining & Cutting Services Available For 718 Nickel Alloy Cold Rolled, Black Round Bar and Threaded Rods Sizes

718 Inconel Round Bar Size Chart

Type SIZES (mm) SIZES (Inches) ISO Tolerance
Cold Drawn and Polish 3.00 to 75.00 1/8 to 3.00 h8-h9-h10-h11
Cold Drawn and Ground 10.00 to 75.00 5/6 to 2.50 h8-h9-h10-h11
Peeled and Polished 40.00 to 150.00 1.50 to 6.00 h11, h11-DIN 1013
Peeled and Ground 20.00 to 50.00 3/4 to 2.00 h9-h10-h11

Cut to size on request (tolerance +2/-0 mm). Inconel 718 Round Bar Standard lengths of 2000 mm up to 6000 mm.

5.0 45.0
6.0 50.0
7.0 55.0
8.0 60.0
9.0 65.0
10.0 70.0
12.0 75.0
16.0 80.0
20.0 90.0
25.0 100.0
30.0 130.0
35.0 160.0
40.0 200.0