Suppliers of Hastelloy Plate and Check Ni C276 Sheet Dimensions
Check Quenching UNS N10276 Strip Specification, Buy Alloy C276 Coil at factory price
Hastelloy C276 Plate
Ni C276 Sheet
ASTM B575 Hastelloy C276 Strip
Hastelloy Plate
UNS N10276 Coil
Table of Content
- Material Specification Chart of Hastelloy Plate
- Common types of ASTM B575 Hastelloy Sheet
- Weight Chart of Ni C276 Sheet
- Dimension Chart of Hastelloy C276 Strip
- Alloy Hastelloy C276 Plate Price
- Chemical Properties of JIS NW 0276 Hastelloy C276 Sheet
- Hastelloy C276 Coil Mechanical Properties Table
- Equivalent Grades of ASTM B575 UNS N10276 Cold Drawn Plates
- Properties of Alloy C276 Plate
- Standards of Hastelloy C276 Foil
- Difference Between Hastelloy Plate and Inconel Plate
- ASME SB575 UNS N10276 Hot Rolled Plates Sizes
Material Specification Chart of Hastelloy Plate
| 2.4819 Hastelloy C276 Sheet Specifications | ASTM / ASME SB575 |
| Size of SB 575 Hastelloy C276 Strip | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Alloy Hastelloy C276 Coil Thickness | 0.1mm to 12 mm Thk |
| UNS N10276 Hastelloy C276 Foil Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish of Manufacturer of Alloy C276 Plate | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hastelloy C276 SB575 4mm Thick Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Common types of ASTM B575 Hastelloy Sheet
Hastelloy Steel Plate 2.4819 C276 N10276 Sheet
Hot Rolled Nickel Alloy C276 Sheet
Asme Sb575 Hastelloy C276 Sheet
Nickel Alloy C276 4x8 Hastelloy Sheet
0.5mm-60mm Hot Rolled Alloy C276 Sheet
N10276/2.4819/alloy C276 Hastelloy Alloy Checker Plate
Hastelloy C276 Plate/astm B575 Nickel-chromium Alloy Plates
Hastelloy C276 2mm 3mm 5mm Nickle Alloy Steel Sheet Plate
Nickel Alloy Hastelloy C276 0.1mm Thickness Strip Coil Foil
JIS NW 0276 Shim Sheet Stockist, Check ASME SB575 DIN 2.4819 Cold Drawn and Hot Rolled Plates Weight Chart
Weight Chart of Ni C276 Sheet
| Thickness in Inches | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Dimension Chart of Hastelloy C276 Strip
Hastelloy C276 Plate Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B : Cold rolled, heat treated, pickled, skin passed Plate | 10 to 24 | 72* |
| 2D : Cold rolled, heat treated, pickled plate | 12 to 24 | 60 |
| BA Mexinox only | 18 to 28 | 48 |
| Polished plate (not brushed) | 11 to 24 | 60 |
| Temper rolled plate Mexinox only | 13 to 29 | 48 |
C276 Alloy Plate Metric Dimensions
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B : Cold rolled, heat treated, pickled, skin passed plate | 0.25 to 8.0 | 2032 |
| 2D : Cold rolled, heat treated, pickled plate | 0.4 to 6.35 | 1524 |
| 2E : Cold rolled, heat treated, mechanically descaled plate | 0.4 to 8.0 | 2032 |
| 2R : Cold rolled, bright annealed plate | 0.25 to 3.5 | 1524 |
| 2H : Work hardened plate | 0.4 to 6.35 | 1524 |
| Polished, brushed plate | 0.5 to 4.0 | 1524 |
Alloy Hastelloy C276 Plate Price
| Price of Hastelloy C276 Plate | Nickel Alloy C276 Plate Price in USD |
|---|---|
| Hastelloy Alloy C276 Sheet | $18.55 |
| ASTM B575 C276 Hastelloy 2D Plate | $40.95 |
| Hastelloy C276 Alloy Strip Tape | $24.39 |
| Alloy C276 Hastelloy Hot Rolled Plate | $28.63 |
Chemical & Equivalent Composition Of GOST ХН65МВУ Foil, Strip Tape and Chequered Plate
Chemical Properties of JIS NW 0276 Hastelloy C276 Sheet
| Grade | C | Mn | Si | S | Co | Ni | Cr | Fe | Mo | P |
| C276 | 0.010 max | 1.00 max | 0.08 max | 0.03 max | 2.50 max | 50.99 min* | 14.50 – 16.50 | 4.00 – 7.00 | 15.00 – 17.00 | 0.04 max |
Hastelloy C276 Coil Mechanical Properties Table
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Hastelloy C276 | 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52,000 , MPa – 355 | 40 % |
Equivalent Grades of ASTM B575 UNS N10276 Cold Drawn Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN | OR |
| Hastelloy C276 | 2.4819 | N10276 | NW 0276 | ХН65МВУ | NiMo16Cr15W | ЭП760 |
Properties of Alloy C276 Plate
| Density | lb/in³ | 0.321 |
|---|---|---|
| g/cm³ | 8.89 | |
| Specific Heat | Btu/lb•°F | 0.102 |
| J/kg•°C | 427 | |
| Melting Range | °F | 2415-2500 |
| °C | 1325-1370 | |
| Thermal Conductivity | Btu•in/ft²•h•°F | 67.9 |
| W/m•°C | 427 | |
| Young's Modulus | 103 ksi | 29.8 |
| GPa | 205 | |
| Shear Modulus | 103 ksi | 11.4 |
| GPa | 79 | |
| Permeability | 200 oersted (15.9 kA/m) | 1.0002 |
| Poisson's Ratio | 0.307 |
Standards of Hastelloy C276 Foil
| Rod, Bar, Wire and Forging Stock |
|
| Plate, Sheet and Strip |
|
| Pipe and Tube |
|
| Fittings |
|
Hastelloy C276 Sheet Uses
- C276 Hastelloy Shim Sheet uses in Gas Processing
- Hastelloy C-276 UNS N10276 Cold Rolled Plate uses in Specialty Chemicals
- JIS NW C276 Plate uses in Pharmaceuticals
- Hastelloy C276 N10276 Slitting Coil uses in Off-Shore Oil Drilling
- Hastelloy C276 Grade Shim Sheet uses in Power Generation
- Nickel Alloy C276 Clad Plate uses in Petrochemicals
- Hastelloy UNS N10276 Polished Cold Drawn Plate uses in Chemical Equipment
- 2.4819 Alloy C276 Flat Plate uses in Condensers
- Hastelloy C276 ASTM B575 Polish Plate uses in Pulp and Paper Industry
- Hastelloy C276 Circle uses in Sea Water Equipment
- Haynes Alloy C276 N10276 Polished Plate uses in Heat Exchangers
Difference Between Hastelloy Plate and Inconel Plate
Hastelloy Plate
Hastelloy® could be a trademark for a series of high-strength, nickel based, corrosion resistant alloys created by Haynes Worldwide.
Hastelloy Melting Point, Density and Tensile Strength
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | |
|---|---|---|---|---|---|
| Hastelloy C22 Plate | 8.69 g/cm3 | 1399 °C (2550 °F) | Psi – 1,00,000 , MPa – 690 | Psi – 45000 , MPa – 310 | 45 % |
| Hastelloy C276 Plate | 8.89 g/cm33 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52,000 , MPa – 355 | 40% |
| Hastelloy B2 Plate | 9.2 g/cm3 | 1370 °C (2550 °F) | Psi – 1,15,000 , MPa –760 | Psi – 52,000 , MPa – 350 | 40% |
| Hastelloy B3 Plate | 9.2 g/cm3 | 1370 °C (2550 °F) | Psi – 1,15,000 , MPa –760 | Psi – 52,000 , MPa – 350 | 40% |
| Hastelloy C4 Plate | 8.64 g/cm3 | 1350-1400 °C | 783 | 365 | 55% |
| Hastelloy Hybrid BC1 Plate | 8.83 g/cm³ | 1343 - 1443°C | 725 | 310 | 40% |
| Hastelloy X Plate | 8.22 g/cm³ | 1355°C | 655 MPa | 240 MPa | 35% |
Inconel Plate
Inconel is a family of austenitic nickel-chromium-based superalloys.
Inconel Melting Point, Density and Tensile Strength
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | |
|---|---|---|---|---|---|
| 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
| 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
| 617 | 8.3g/cm³ | 1363°C | ≥ 485 MPa | ≥ 275 MPa | 25 % |
| 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 135,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
| 690 | 8.3g/cm³ | 1363°C | ≥ 485 MPa | ≥ 275 MPa | 25 % |
| 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 135,000 , MPa – 930 | Psi – 70,000 , MPa – 482 | 45 % |
| 725 | 8.31 g/cm3 | 1271°C-1343 °C | 1137 MPa | 827 MPa | 20 % |
| X-750 | 8.28 g/cm3 | 1430°C | 1267 MPa | 868 MPa | 25 % |
ISO Certified Importers Of EN NiMo16Cr15W Mesh and Polished Plates, View c276 Hastelloy Shim Sheet Size Chart
ASME SB575 UNS N10276 Hot Rolled Plates Sizes
| Size (in inches) | Size (in MM) |
|---|---|
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .600 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
Stocking Distributor Of Hastelloy C276 Plate Following Manufacturers in UAE
Stockist of ASTM B575 UNS N10276 Hastelloy C276 Sheet in UAE