Incoloy 825 Sheet and 825 Alloy Strip Supplier
Stockist of 2.4858 Incoloy 825 Coil, Alloy 825 Foil
Incoloy Alloy 825 Plate
ASTM B424 UNS N08825 Sheet
Nickel Alloy 825 Coil
Table of Content
- Inconel 825 Plate Spec
- Various Types of Alloy Incoloy 825 Sheet
- 2.4858 Incoloy 825 Coil Mechanical Structure
- Chemical Composition of Inconel 825 Foil
- Alloy 825 Inconel Strip Tape Equivalent
- Uses of Alloy 825 UNS N08825 Hot Rolled Plate
- Incoloy 825 Din 2.4858 Shim Sheet Sizes
- Testing and Documentation of Alloy 825 Nickel Cold Rolled Plate
- Incoloy 825 Nickel Clad Plate Dimension Chart
- Processing of Alloy 825 Incoloy Flat Plate
- Weight of Incoloy 8825 Polish Plate
Check Price and Specification of SB424 Alloy 825 Polished Plate, GOST ЭП703 Shim Sheet
Inconel 825 Plate Spec
| Grade | Inconel Alloy 825, UNS N08825, Werkstoff Nr. 2.4876 |
| Type | Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc. |
| Thickness | 0.3mm To 200mm |
| Width |
200mm to 3000mm |
| Length | 500mm to 12000mm |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc |
| Form | Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Standards | ASTM B168, B424, B443 / ASME SB168, SB424, SB443 |
| Sheet & Plate in Form of | Coils, Foils, Flats, Strip, Blank (Circle), Ring (Flange) & Perforated Sheet Etc. |
Various Types of Alloy Incoloy 825 Sheet
Cold Rolled Incoloy 825 Sheet / Plate
UNS N08825 2.4858 Nickel alloy sheet plate
ASTM B424 Alloy 825 Perforated Sheet
Inconel825/UNS N08825/W.Nr.2.4858 nickel alloy plate/sheet/strip/coil
Nickel Alloy Plate Astm B424 / Uns No8825 Incoloy 825 Sheet
Nickel Alloy Incoloy 825 Plate
Incoloy Alloy 825 (UNS N08825) Corrosion Resistant Nickel Alloy Plate Sheet
2.4858 Incoloy 825 Coil Mechanical Structure
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Chemical Composition of Inconel 825 Foil
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Alloy 825 Inconel Strip Tape Equivalent
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Uses of Alloy 825 UNS N08825 Hot Rolled Plate
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
Incoloy 825 Din 2.4858 Shim Sheet Sizes
Stocked Sizes |
|
|---|---|
| Size in inches | Size in mm |
| .125 | 3.18 |
| .134 | 3.40 |
| .156 | 3.96 |
| .187 | 4.75 |
| .250 | 6.35 |
| .312 | 7.92 |
| .375 | 9.53 |
| .500 | 12.7 |
| .625 | 15.9 |
| .750 | 19.1 |
| .875 | 22.2 |
| 1 | 25.4 |
| 1.125 | 28.6 |
| 1.250 | 31.8 |
| 1.500 | 38.1 |
| 1.750 | 44.5 |
| 2 | 50.8 |
| 2.500 | 63.5 |
| 3 | 76.2 |
Testing and Documentation of Alloy 825 Nickel Cold Rolled Plate
- Mechanical examining like tensile, Elongation
and reduction of area. - Chemical examination
- Radiographic Test
- Pitting Corrosion Test
- Positive material recognition
- Eddy Current test
- Buckling & Crushing test
View Dimension and Sizes of EN NiCr21Mo Hot, Cold Rolled Plate and Nickel Alloy 825 Perforated Sheet
Incoloy 825 Nickel Clad Plate Dimension Chart
Metric Dimensions
| Surface finish | Thickness (mm) | Width (mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
| 2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
| 2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
| 2H – Work hardened | 0.4–6.35 | max. 1524 |
| Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions
| Surface finish | Gauge (in) | Width (in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
| 2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
| BA Mexinox only | 18–28 | max. 48 |
| Polished (not brushed) | 11–24 | max. 60 |
| Temper rolled Mexinox only | 13–29 | max. 48 |
Processing of Alloy 825 Incoloy Flat Plate
- Hot rolled
- Cold rolled
- Cutting
- Forming Drilling/ Machining
- Grinding
- Polishing
- Testing
Inventory of JIS NCF 825 Clad, Mesh Plate. Check Weight Chart of Inconel 825 Chequered Plate
Weight of Incoloy 8825 Polish Plate
| Thickness | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |