Inconel 718 Plate | ASTM B670 UNS N07718 Sheet

ONGC Approved Alloy 718 Sheet Supplier, Check UNS N07718 Coil Dimensions In Milimeter

Get 718 Inconel Strip At Market Price, Check 2.4668 Inconel 718 Hot and Cold Plate Specifications Chart

Inconel 718 Plate

ASTM B670 UNS N07718 Sheet

Alloy 718 Strip

Table of Content

Specification Format of Inconel 718 Plate
ASTM B670 UNS N07718 Sheet Standard Spec
Frequently Used Alloy 718 Strip Types
Dimensional Chart of Inconel 718 Coil
2.4668 Inconel 718 Sheet Chemical Compatibility
Sizes of Alloy Inconel 718 Strip
Nickel Alloy 718 Plate Mechanical Characteristics
ASTM B670 Inconel 718 Foil Material Equivalent
Alloy 718 Sheet physical Properties
Difference Between Inconel Plate & Incoloy Plates
Weight of ASME Sb670 UNS N07718 Hot Rolled Plate
Inconel 718 Cold Rolled Plate Price

Specification Format of Inconel 718 Plate

ASTM B670 Inconel 718 Sheet Specifications	ASTM B670 / ASME SB670, AMS 5596, AMS 5597
Dimensions of SB670 Inconel 718 Strip	ASTM, ASME, and API
Inconel Sheet	thickness range from .008" to .0125"
Inconel Plate	thickness ranges from .0125" to 5.00"
UNS N07718 Inconel 718 Foil Size	15NB to 150NB In
Tempers of 2.4668 Inconel 718 Coil	Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard
Alloy Inconel 718 Clad Plate Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Inconel Alloy 718 Sheet Form	Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.

ASTM B670 UNS N07718 Sheet Standard Spec

Rod, Bar, Wire and Forging Stock	ASTM B 637 ASME SB 637 SAE AMS 5662 SAE AMS 5663 SAE AMS 5664 SAE AMS 5832 SAE AMS 5914 SAE AMS 5962 ASME Code Case 1993 ASME Code Case 2206 ASME Code Case 2222 AECMA PrEN 2404 AECMA PrEN 2405 AECMA PrEN 2952 AECMA PrEN 2961 AECMA PrEN 3219 AECMA PrEN 3666 ISO 9723 ISO 9724 ISO 9725 DIN 17752-17754
Plate, Sheet and Strip	ASTM B 670 ASTM B 906 ASME SB 670 ASME SB 906 SAE AMS 5596 SAE AMS 5597 SAE AMS 5950 AECMA PrEN 2407 AECMA PrEN 2408 ISO 6208 DIN 1775
Pipe & Tube	SAE AMS 5589 SAE AMS 5590 ASME Code Case N-253 DIN 17751

Frequently Used Alloy 718 Strip Types

Inconel 718 Sheet Super Alloy Uns N07718 Sheet / Plate

AMS B670 Inconel 718 Plate Incoloy 718 Sheet

Polished Inconel 718 Nickel Alloy Steel Plate

Hot Rolled Inconel 718 Nickel Plate

Cold Hot Rolled UNS N07718/ Inconel Alloy 718 Plate/ Sheet

Inconel 718 Alloy Steel Plate

Inconel 718 Plates 4mm

ASTM B 670 ASTM B 906 ASME SB 670 ASME SB 906 inconel 718 plate

ASTM B637 Inconel 718 UNS N07718 GH4169 W.Nr 2.4668 Sheet / Plate

Dimensional Chart of Inconel 718 Coil

Inconel 718 Plate Imperial Dimensions

Plate Surface finish	Gauge (in)	Width (max in)
2B : Cold rolled, heat treated, pickled, skin passed Plate	10 to 24	72*
2D : Cold rolled, heat treated, pickled plate	12 to 24	60
BA Mexinox only	18 to 28	48
Polished plate (not brushed)	11 to 24	60
Temper rolled plate Mexinox only	13 to 29	48

718 Alloy Plate Metric Dimensions

Plate Surface finish	Thickness (Milimeter)	Width (max Milimeter)
2B : Cold rolled, heat treated, pickled, skin passed plate	0.25 to 8.0	2032
2D : Cold rolled, heat treated, pickled plate	0.4 to 6.35	1524
2E : Cold rolled, heat treated, mechanically descaled plate	0.4 to 8.0	2032
2R : Cold rolled, bright annealed plate	0.25 to 3.5	1524
2H : Work hardened plate	0.4 to 6.35	1524
Polished, brushed plate	0.5 to 4.0	1524

2.4668 Inconel 718 Sheet Chemical Compatibility

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 718	0.08 max	0.35 max	0.35 max	0.015max	0.30 max	–	50.00 – 55.00	17.00 – 21.00

Stockist of Nickel Alloy 718 Clad Plate, Check ASTM B670 Inconel 718 Foil Sizes

Sizes of Alloy Inconel 718 Strip

Size (in inches)	Size (in mm)
.125	3.18
.134	3.40
.156	3.96
.187	4.75
.250	6.35
.312	7.92
.375	9.53
.500	12.7
.600	15.9
.750	19.1
.875	22.2
1	25.4
1.125	28.6
1.250	31.8
1.500	38.1
1.750	44.5
2	50.8
2.500	63.5
3	76.2

Nickel Alloy 718 Plate Mechanical Characteristics

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 718	8.2 g/cm3	1350 °C (2460 °F)	Psi – 1,35,000 , MPa – 930	Psi – 75,000 , MPa – 482	45 %

ASTM B670 Inconel 718 Foil Material Equivalent

STANDARD	WERKSTOFF NR.	UNS
Inconel 718	2.4668	N07718

Alloy 718 Sheet physical Properties

melting range	1321-1393°C
Specific Gravity	7.98 g/cm3
Density	8.193 g/cm³

Difference Between Inconel Plate & Incoloy Plates

Inconel Plate

Inconel is a family of austenitic nickel-chromium-based superalloys.

Inconel Composition

Inconel	Element (% by mass)
Inconel	Ni	Cr	Fe	Mo	Nb	Co	Mn	Cu	Al	Ti	Si	C	S	P	B
600	72.0	14.0–17.0	6.0–10.0				1.0	0.5			0.5	0.15	0.015
617	44.2–56.0	20.0–24.0	3.0	8.0–10.0		10.0–15.0	0.5	0.5	0.8–1.5	0.6	0.5	0.15	0.015	0.015	0.006
600	58.0	20.0–23.0	5.0	8.0–10.0	3.15–4.15	1.0	0.5		0.4	0.4	0.5	0.1	0.015	0.015
690	59.5	30	9.2				0.35	0.01	0.02		0.35	0.019	0.003
718	50.0–55.0	17.0–21.0	balance	2.8–3.3	4.75–5.5	1.0	0.35	0.2–0.8	0.65–1.15	0.3	0.35	0.08	0.015	0.015	0.006
X-750	70.0	14.0–17.0	5.0–9.0		0.7–1.2	1.0	1.0	0.5	0.4–1.0	2.25–2.75	0.5	0.08	0.01

Incoloy Plates

Incoloy refers to a range of superalloys produced by the Special Metals Corporation group of companies.

Incoloy Compositions (percentages)

Alloy name	Balance metal	Chro mium	Alu minum	Tita nium	Carbon	Yttrium oxide	Copper	Man ganese	Cobalt	Nickel	Phos phorus	Silicon	Sulphur	Moly bdenum	Nb +Ti
020	Fe (~40%)	20	n/p	n/p	<0.07	n/p	3.5	<2.0	n/p	35	<0.045	<1.0	<0.035	2.5	about 1
DS	Fe (~40%)	18	n/p	0.2	0.1	nil	0.5	0.8-1.5	18 (Co+ Ni 38)	18 (Co+ Ni 38)	n/p	2.3	0.03
MA956	Fe (~75%)	20	4.75	0.4	<0.1	0.5	<0.15	<0.3	<0.3	<0.5	<0.02	n/p	n/p

Refer ASME Sb670 UNS N07718 Strip Tape Weight Chart, Importer Of Inconel 718 Chequered Plate

Weight of ASME Sb670 UNS N07718 Hot Rolled Plate

Thickness in inches	Plate Weight per Unit Area	Density
3/16	0.06000 lbs/in²42.184176 kg/m²	0.315 lbs/in³8.72 g/cm³
1/4	0.08 lbs/in²56.245568 kg/m²	0.315 lbs/in³8.72 g/cm³
3/8	0.121 lbs/in²85.0714216 kg/m²	0.315 lbs/in³8.72 g/cm³
1/2	0.161 lbs/in²113.1942056 kg/m²	0.315 lbs/in³8.72 g/cm³
5/8	0.196 lbs/in²137.8016416 kg/m²	0.315 lbs/in³8.72 g/cm³
3/4	0.235 lbs/in²165.221356 kg/m²	0.315 lbs/in³8.72 g/cm³
7/8	0.274 lbs/in²192.6410704 kg/m²	0.315 lbs/in³8.72 g/cm³
1	0.313 lbs/in²220.0607848 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/4	0.391 lbs/in²274.9002136 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/2	0.47 lbs/in²330.442712 kg/m²	0.315 lbs/in³8.72 g/cm³
1 3/4	0.549 lbs/in²385.9852104 kg/m²	0.315 lbs/in³8.72 g/cm³
2	0.627 lbs/in²440.8246392 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/4	0.705 lbs/in²495.664068 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/2	0.784 lbs/in²551.2065664 kg/m²	0.315 lbs/in³8.72 g/cm³
2 3/4	0.862 lbs/in²606.0459952 kg/m²	0.315 lbs/in³8.72 g/cm³
3	0.941 lbs/in²661.5884936 kg/m²	0.315 lbs/in³8.72 g/cm³

We provide Multiple Payment Options Of UNS N07718 Perforated Sheet, Contact US Today to Buy 718 Alloy Checker Plate at best Price

Inconel 718 Cold Rolled Plate Price

Price list of Inconel Plate	Inconel Plate Price in USD
Alloy 718 sheet	US $6.00-$20.00 / Kilogram
Nickel Alloy Inconel 718 Sheet/Plate	US $18.00-$28.00 / Kilogram
Inconel 718 Dia : 2.5 (Scbin0067)534 Lbs. (Ni : 53%)	US $35.55

Inconel 718 Plate Uses

ASTM B670 Alloy 718 Plates used in Construction
2.4668 Alloy 718 Coil used in Chemicals
718 Inconel Strip Tape used in Pesticides
Inconel 718 Alloy Hot Rolled Plates used in Power Plants
Alloy 718 Inconel Shim Sheet used in Fertilizers
Inconel 718 Grade Flat Plates used in Pharmaceuticals
Inconel Alloy 718 Circle used in Modern Architecture
ASTM B670 UNS N07718 Inconel Cold Rolled Plates used in Dairy and Food Processing
JIS NCF 718 Plates used in Textile Machinery

ASTM B670 UNS N07718 Inconel 718 Plate